Preview



Why the RS Glide? Because it's the best thing that could have happened to me.


After more than 10 years in the wingsuit BASE environment and having flown many suits from various manufacturers I was looking for a new one that starts quickly, glides well, can fly fast and has a good flare.

 

Of course it should also have plenty of pockets for the Stashbag, trekking poles, ropes, etc., and be easy to put on, offer a solid footing at the various exits and be stable in every flight position.

 

As luck would have it, I got in touch with Intrudair. We combined my experience in wingsuit BASEjumping and their experience in manufacturing. I also had the opportunity to work on the development process during the test jump phase and the final result has surpassed my expectations. We ended up creating a unique suit that is at home in the Alps and any other of the high mountains on this beautiful planet.


Are you light or heavy like me and want to have a quick start?


Do you want to glide far and fly fast?

Do you want to be able to fly steep?

Do you want to fly dynamically on belly and back?

Do you want to have a fun and powerful flare?

Do you want to stow all your equipment in the suit?

Are you an experienced wingsuiter and ready to take the next steps?


Hit the order button and smile like I did while experiencing this new suit first hand.


/ Stiven Gade / 


Featured properties:

  • Nearly instant usability after exit. The suit can be quite aggressive, but we also focused on safety and usability features.
  • During relaxed flight, it's quite easy to control, after stepping in line it's still agile and smoothly controllable. It can go back to relaxed flying in an easy transition.
  • Easy to pull, deployment is complication free.


Main Features:

  • New air inlets (unique in the market) - extreme fast inflating.
  • Leading edge with high performance material, with an additional medium soft performance foam.
  • The rib count has been doubled, providing extra smooth wing surface.
  • Foam filled booties, shape-preserving design for better stability.



Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.


Why the RS Glide? Because it's the best thing that could have happened to me.


After more than 10 years in the wingsuit BASE environment and having flown many suits from various manufacturers I was looking for a new one that starts quickly, glides well, can fly fast and has a good flare.

 

Of course it should also have plenty of pockets for the Stashbag, trekking poles, ropes, etc., and be easy to put on, offer a solid footing at the various exits and be stable in every flight position.

 

As luck would have it, I got in touch with Intrudair. We combined my experience in wingsuit BASEjumping and their experience in manufacturing. I also had the opportunity to work on the development process during the test jump phase and the final result has surpassed my expectations. We ended up creating a unique suit that is at home in the Alps and any other of the high mountains on this beautiful planet.


Are you light or heavy like me and want to have a quick start?


Do you want to glide far and fly fast?

Do you want to be able to fly steep?

Do you want to fly dynamically on belly and back?

Do you want to have a fun and powerful flare?

Do you want to stow all your equipment in the suit?

Are you an experienced wingsuiter and ready to take the next steps?


Hit the order button and smile like I did while experiencing this new suit first hand.


/ Stiven Gade / 


Featured properties:

  • Nearly instant usability after exit. The suit can be quite aggressive, but we also focused on safety and usability features.
  • During relaxed flight, it's quite easy to control, after stepping in line it's still agile and smoothly controllable. It can go back to relaxed flying in an easy transition.
  • Easy to pull, deployment is complication free.


Main Features:

  • New air inlets (unique in the market) - extreme fast inflating.
  • Leading edge with high performance material, with an additional medium soft performance foam.
  • The rib count has been doubled, providing extra smooth wing surface.
  • Foam filled booties, shape-preserving design for better stability.



Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.

Videos

How to Share With Just Friends

How to share with just friends.

Közzétette: Facebook – 2014. december 5., péntek

Configurator / Designer


CONFIGURATOR

Pre-made Designs
Only Printed


EASY-TO-SELECT DESIGNS


CONFIGURATOR

Full custom-made
Separately printable elements


ALL ELEMENTS CAN BE COLORED & PRINTED


Your browser:

RS Glide ®

1/5 DESIGNER

PRICE: 0 +VAT

Designer

Elements

Stitching color

Premade Designs
These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS Glide ®

Code: p1

RS Glide ®

Code: p2

RS Glide ®

Code: p3

RS Glide ®

Code: p4

RS Glide ®

Code: p5

RS Glide ®

Code: p6

RS Glide ®

Code: p7

RS Glide ®

Code: p8

RS Glide ®

Code: p9

RS Glide ®

Code: p10

RS Glide ®

Code: p11

RS Glide ®

Code: p12

RS Glide ®

Code: p13

RS Glide ®

Code: p14

RS Glide ®

Code: p15

RS Glide ®

Code: p16

RS Glide ®

Code: p17

RS Glide ®

Code: p18

RS Glide ®

Code: p19

RS Glide ®

Code: p20

RS Glide ®

Code: p21

RS Glide ®

Code: p22

RS Glide ®

Code: p23

RS Glide ®

Code: p24

RS Glide ®

Code: p25

RS Glide ®

Code: p26

RS Glide ®

Code: p27

RS Glide ®

Code: p28

RS Glide ®

Code: p29

RS Glide ®

Code: p30

RS Glide ®

Code: p31

RS Glide ®

Code: p32

RS Glide ®

Code: p33

RS Glide ®

Code: p34

RS Glide ®

Code: p35

RS Glide ®

Code: p36

RS Glide ®

Code: p37

RS Glide ®

Code: p38

RS Glide ®

Code: p39

RS Glide ®

Code: p40

The suits will look very similar to the images below.
The pattern of the prints continue across the cuts.

RS Glide ®

Code: e1

RS Glide ®

Code: e2

RS Glide ®

Code: e3

RS Glide ®

Code: e4

RS Glide ®

Code: e5

RS Glide ®

Code: e6

RS Glide ®

Code: e7

RS Glide ®

Code: e8

RS Glide ®

Code: e9

RS Glide ®

Code: e10

RS Glide ®

Code: e11

RS Glide ®

Code: e12

RS Glide ®

Code: e13

RS Glide ®

Code: e14

RS Glide ®

Code: e15

RS Glide ®

Code: e16

RS Glide ®

Code: e17

RS Glide ®

Code: e18

RS Glide ®

Code: e19

RS Glide ®

Code: e20

RS Glide ®

Code: e21

RS Glide ®

Code: e22

RS Glide ®

Code: e23

RS Glide ®

Code: e24

RS Glide ®

Code: e25

RS Glide ®

Code: e26

RS Glide ®

Code: e27

RS Glide ®

Code: e28

RS Glide ®

Code: e29

RS Glide ®

Code: e30

Pre-Colored designs
RS Glide ®

Code: color1

RS Glide ®

Code: color2

RS Glide ®

Code: color3

RS Glide ®

Code: color4

RS Glide ®

Code: color5

RS Glide ®

Code: color6

RS Glide ®

Code: color7

RS Glide ®

Code: color8

RS Glide ®

Code: color9

RS Glide ®

Code: color10

RS Glide ®

Code: color11

RS Glide ®

Code: color12

RS Glide ®

Code: color13

RS Glide ®

Code: color14

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS Glide ®

Code: art1

RS Glide ®

Code: art1b

RS Glide ®

Code: art2

RS Glide ®

Code: art2b

RS Glide ®

Code: art3

RS Glide ®

Code: art3b

RS Glide ®

Code: art4

RS Glide ®

Code: art4b

RS Glide ®

Code: art5

RS Glide ®

Code: art5b

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS Glide ®

Code: comic1

RS Glide ®

Code: comic1b

RS Glide ®

Code: comic2

RS Glide ®

Code: comic2b

RS Glide ®

Code: comic3

RS Glide ®

Code: comic3b

RS Glide ®

Code: comic4

RS Glide ®

Code: comic4b

RS Glide ®

Code: comic5

RS Glide ®

Code: comic5b

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS Glide ®

Code: geo1

RS Glide ®

Code: geo2

RS Glide ®

Code: geo3

RS Glide ®

Code: geo4

RS Glide ®

Code: geo5

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS Glide ®

Code: nc1

RS Glide ®

Code: nc2

RS Glide ®

Code: nc3

RS Glide ®

Code: nc4

RS Glide ®

Code: nc5

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS Glide ®

Code: psy1

RS Glide ®

Code: psy2

RS Glide ®

Code: psy3

RS Glide ®

Code: psy4

RS Glide ®

Code: psy5

Measurements Fields marked with * are required!
Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.
Please, fill out each field.
Please, enter at least 1 piece of one size.



Click on the form field
and begin measuring.

Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.

Settings & Extras

Settings

Gender

Choose you sex.

Female Male

Options: + EXTRA CHARGE

Camera Pocket

Zipper opening at the chest for chest mounted cameras.

Backfly Inlets

3D Performance Foam

Better performance, more accurate leading edge/ better shape, tighter fit on the arms.

Embroideries Fields marked with * are required!

Name Embroidery

+20€

Extra Embroidery

+40€

Upload extra embroideries

Billing Address Fields marked with * are required!

I have a company

Processing.. Please Wait!