Preview

About the Suit



It was developed for long years to be the most comfortable, the strongest and the most appropriate for the aim, using the advice and needs of many experienced pilots and groups. You can order it from many kinds of materials, with different kinds of grips and extras, according to your needs, from the basic to the full extra type.

 

Including: Bootie, inner pocket, grips on the arm and legs, strengthened cordura or parapack knee, double bottom-patch.


Available extras: Double grips on the upper-arm, extra heel on the bootie, bootie with air-pocket, soft knee-patch, extra pockets on the upper-arm/ thigh/ bootie, extra thick lower-arm, extra embroidery.


The factory deafult is 1-1 grips on the arms and 1-1 on the legs.



It was developed for long years to be the most comfortable, the strongest and the most appropriate for the aim, using the advice and needs of many experienced pilots and groups. You can order it from many kinds of materials, with different kinds of grips and extras, according to your needs, from the basic to the full extra type.

 

Including: Bootie, inner pocket, grips on the arm and legs, strengthened cordura or parapack knee, double bottom-patch.


Available extras: Double grips on the upper-arm, extra heel on the bootie, bootie with air-pocket, soft knee-patch, extra pockets on the upper-arm/ thigh/ bootie, extra thick lower-arm, extra embroidery.


The factory deafult is 1-1 grips on the arms and 1-1 on the legs.



Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.

Your browser:

RW Suit ®

1/5 DESIGNER

PRICE: 0 +VAT

Designer

Elements

Stitching color

Premade Designs
These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RW Suit  ®

Code: p1

RW Suit  ®

Code: p2

RW Suit  ®

Code: p3

RW Suit  ®

Code: p4

RW Suit  ®

Code: p5

RW Suit  ®

Code: p6

RW Suit  ®

Code: p7

RW Suit  ®

Code: p8

RW Suit  ®

Code: p9

RW Suit  ®

Code: p10

RW Suit  ®

Code: p11

RW Suit  ®

Code: p12

RW Suit  ®

Code: p13

RW Suit  ®

Code: p14

RW Suit  ®

Code: p15

RW Suit  ®

Code: p16

RW Suit  ®

Code: p17

RW Suit  ®

Code: p18

RW Suit  ®

Code: p19

RW Suit  ®

Code: p20

RW Suit  ®

Code: p21

RW Suit  ®

Code: p22

RW Suit  ®

Code: p23

RW Suit  ®

Code: p24

RW Suit  ®

Code: p25

RW Suit  ®

Code: p26

RW Suit  ®

Code: p27

RW Suit  ®

Code: p28

RW Suit  ®

Code: p29

RW Suit  ®

Code: p30

RW Suit  ®

Code: p31

RW Suit  ®

Code: p32

RW Suit  ®

Code: p33

RW Suit  ®

Code: p34

RW Suit  ®

Code: p35

RW Suit  ®

Code: p36

RW Suit  ®

Code: p37

RW Suit  ®

Code: p38

RW Suit  ®

Code: p39

RW Suit  ®

Code: p40

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RW Suit  ®

Code: art1

RW Suit  ®

Code: art2

RW Suit  ®

Code: art3

RW Suit  ®

Code: art4

RW Suit  ®

Code: art5

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RW Suit  ®

Code: comic1

RW Suit  ®

Code: comic2

RW Suit  ®

Code: comic3

RW Suit  ®

Code: comic4

RW Suit  ®

Code: comic5

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RW Suit  ®

Code: geo1

RW Suit  ®

Code: geo2

RW Suit  ®

Code: geo3

RW Suit  ®

Code: geo4

RW Suit  ®

Code: geo5

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RW Suit  ®

Code: nc1

RW Suit  ®

Code: nc2

RW Suit  ®

Code: nc3

RW Suit  ®

Code: nc4

RW Suit  ®

Code: nc5

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RW Suit  ®

Code: psy1

RW Suit  ®

Code: psy2

RW Suit  ®

Code: psy3

RW Suit  ®

Code: psy4

RW Suit  ®

Code: psy5

Measurements Fields marked with * are required!
Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.
Please, fill out each field.
Please, enter at least 1 piece of one size.
I have a project number:



Click on the form field
and begin measuring.

Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.

Settings & Extras

Settings

Collar type

Select your collar type.

Low Medium High

Gender

Choose you sex.

Female Male

Options: + EXTRA CHARGE

Double Grips on Upperarms

Double upper arm gripper, recommended for FS4 jumps

Elbow Protectors

0.6 cm thick Protector Foam reinforcement, absorbs the hits and blows, recommended especially for tunnel use.

Extra Pocket

Zippered pocket on arms, thighs or inner chest.

Grips on Innerlegs

Formation Skydiving grips on the inside of the legs around the knees.

Knee Protectors

0.6 cm thick Protector Foam reinforcement, absorbs the hits and blows, recommended especially for tunnel use.

VISO Pocket

VISO pocket

Embroideries Fields marked with * are required!

Name Embroidery

+20€

Extra Embroidery

+40€

Upload extra embroideries

Billing Address Fields marked with * are required!

I have a company

Processing.. Please Wait!