Preview

About the Suit



Summer Camera Jacket

Ideal innovation for cameramen in the hot summer weather.
The jacket is made with the minimum amount of material necessary to keep the wings in place, making it wearable and comfortable even on the hottest days and places.
The sleeves can be opened along the line of the arm by a zip to make the arms free. This makes the jacket very breezy and comfortable on the ground, on the plane and under the canopy.
It can also be worn above a jumpsuit.  
The wings are held in place by the sleeves, the back and the minimal front section, which can be clipped on the chest.
It can be ordered with sit, normal or large wings.

Wings
The surface and shape of the wings make it ideal for both belly and sit fly. ALL TYPES OF WINGS ARE 100% SUITABLE FOR BELLY OR FREESTYLE CAMERA FLYING.
The sit wing is recommended for those who are mostly in a sitting or standing (sit fly, head-up fly) position but, of course, it also works perfectly in the belly flying position.
The sewing of the wing is shifted forward from the centre of the body and the arms.  
 
Instructions for use before you jump:

Locking the wings

The lower part of the wing is attached with RSL shackles, so it can be quickly detached with a single movement.
The shackle clip can be optionally attached to the hip ring of thigh straps or to rings sewn onto the trousers. This is always measured and attached by the customer or the local rigger to their own stlye. You can also make attachment points with a circular strap or a soft link sewn onto the thigh strap.
The shackle clip is not fixed at the factory to the bottom point of the wing, each person can adjust this to their own size, fix it with a temporary knot. If it is comfortable, then fix it with a barteck or sew it on (you might need the help of a local rigger).
The inner loops at the wrists are used to attach the swoop up cords that you hang on your thumb or palm.

- comfortable
- functional
- wings and options were developed based on the needs and feedback of professional cameramen.

Material: 4 ply Taslan
Wings: nylon + taslan in the back
Includes RSL shackle, attachable D rings.



Summer Camera Jacket

Ideal innovation for cameramen in the hot summer weather.
The jacket is made with the minimum amount of material necessary to keep the wings in place, making it wearable and comfortable even on the hottest days and places.
The sleeves can be opened along the line of the arm by a zip to make the arms free. This makes the jacket very breezy and comfortable on the ground, on the plane and under the canopy.
It can also be worn above a jumpsuit.  
The wings are held in place by the sleeves, the back and the minimal front section, which can be clipped on the chest.
It can be ordered with sit, normal or large wings.

Wings
The surface and shape of the wings make it ideal for both belly and sit fly. ALL TYPES OF WINGS ARE 100% SUITABLE FOR BELLY OR FREESTYLE CAMERA FLYING.
The sit wing is recommended for those who are mostly in a sitting or standing (sit fly, head-up fly) position but, of course, it also works perfectly in the belly flying position.
The sewing of the wing is shifted forward from the centre of the body and the arms.  
 
Instructions for use before you jump:

Locking the wings

The lower part of the wing is attached with RSL shackles, so it can be quickly detached with a single movement.
The shackle clip can be optionally attached to the hip ring of thigh straps or to rings sewn onto the trousers. This is always measured and attached by the customer or the local rigger to their own stlye. You can also make attachment points with a circular strap or a soft link sewn onto the thigh strap.
The shackle clip is not fixed at the factory to the bottom point of the wing, each person can adjust this to their own size, fix it with a temporary knot. If it is comfortable, then fix it with a barteck or sew it on (you might need the help of a local rigger).
The inner loops at the wrists are used to attach the swoop up cords that you hang on your thumb or palm.

- comfortable
- functional
- wings and options were developed based on the needs and feedback of professional cameramen.

Material: 4 ply Taslan
Wings: nylon + taslan in the back
Includes RSL shackle, attachable D rings.



Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.

Videos

Configurator / Designer


Your browser:

Summer Camera Jacket ®

1/5 DESIGNER

PRICE: 0 +VAT

Designer

Wing size

Choose the wing size that you need.

Sit Small Normal Large

Elements

Stitching color

Measurements Fields marked with * are required!
Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.
Please, fill out each field.
Please, enter at least 1 piece of one size.
I have a project number:



Click on the form field
and begin measuring.

Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.

Settings & Extras

Settings

Gender

Choose you sex.

Female Male

Wing size

Choose the wing size that you need.

Sit Small Normal Large

Options: + EXTRA CHARGE

Embroideries Fields marked with * are required!

Name Embroidery

+20€

Extra Embroidery

+40€

Upload extra embroideries

Billing Address Fields marked with * are required!

I have a company

Processing.. Please Wait!