Intrudair® Intrudair Winter Suit

Preview

About the Suit

It’s a bitter cold winter but even these conditions can’t stop you from skydiving? Are you tired of wearing so many layers you can't move properly while jumping?

Our newest edition of freefly suits is the best option for you. The suit is warm, tight and very comfortable.

The freefly winter suit is produced from 100% highest quality of softshell wind and waterproof materials with elastic and comfortable soft lining layer inside. The most significant advantage of this kind of material is that it has a breathable membrane layer that lets water vapor out and prevents water from entering, also it's totally windproof. Finally, with a long and warm neck you won't get cold!

The tailoring is made just right. With our 3D cutting methods the suit follows the anatomy of the body. It comes standard with cordura knee and elbow reinforcements.

It is possible to order with extra tight leg-cuffs, normal or slim fit version, with inside or outside pockets, freefly grips and cordura bottom.

When developing this suit, we kept in mind the comfort of jumpers with the help of a wearable suit.

New suit trends are occurring in the sport of skydiving worldwide latley. So we modified our freefly design to create a tighter and cleaner suit. The silhouette of the suit narrowly follows the anatomy of the body with a homogenic material use and 3D elbow and knee formation. The suit is tightly tailored on the upper parts of the body and around thighs. The elastic parts around the shoulders, between legs and side of the body will allow you to move much more comfortably.

Extra options: outside pocket, Cordura 1000 Bottom, freefly grips on the arms and legs and printed materials.

It’s a bitter cold winter but even these conditions can’t stop you from skydiving? Are you tired of wearing so many layers you can't move properly while jumping?

Our newest edition of freefly suits is the best option for you. The suit is warm, tight and very comfortable.

When developing this suit, we kept in mind the comfort of jumpers with the help of a wearable suit.

Extra options: outside pocket, Cordura 1000 Bottom, freefly grips on the arms and legs and printed materials.

Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.

The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.

PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.

The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.

BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.

At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.

ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.

For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?

Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.