THE CONFIGURATOR IS LOADING...

Preview

About the Suit



This camera suit has been specially developed for belly flying and RW-Big way camerawork. We used the core tailoring patterns of a tight and smoothened RW suit, with similar material selection: Nylon or Taslan 4-ply front and upper arms, tight spandex or loose taslan 4-ply for lower arms.

 

The power booties are making sure that the suit is agile, and it provides sufficient aviation for precision camerawork, such as RW4 big way or even in rotor wind. You can ask the booties with zipper or rubber. The wing size are personally customized, made from Nylon + Taslan 4-ply.

 

For the wing attachments, you can select between RSL Shakly or carabiner method. The fixing point can be the thigh-strap of your rig, or a velcro on your thigh, called the sandwich method.


Available in 4 different wing sizes: sit, small, normal and big.


1. Sit wing

2. Small wing

3. Normal wing

4. Large wing


 

A looped strap on your hands or thumb helps you to stretch the wings. It is attached to the upper side of the wings with a swoop cord, inside the suit.


The RSL shaklies and velcro sandwiches are not attached to the thighs by default, because the skydiver has to set the comfortable height for themselves. The attachment can be made by a local rigger very easily.



This camera suit has been specially developed for belly flying and RW-Big way camerawork. We used the core tailoring patterns of a tight and smoothened RW suit, with similar material selection: Nylon or Taslan 4-ply front and upper arms, tight spandex or loose taslan 4-ply for lower arms.

 

The power booties are making sure that the suit is agile, and it provides sufficient aviation for precision camerawork, such as RW4 big way or even in rotor wind. You can ask the booties with zipper or rubber. The wing size are personally customized, made from Nylon + Taslan 4-ply.

 

For the wing attachments, you can select between RSL Shakly or carabiner method. The fixing point can be the thigh-strap of your rig, or a velcro on your thigh, called the sandwich method.


Available in 4 different wing sizes: sit, small, normal and big.


1. Sit wing

2. Small wing

3. Normal wing

4. Large wing


 

A looped strap on your hands or thumb helps you to stretch the wings. It is attached to the upper side of the wings with a swoop cord, inside the suit.


The RSL shaklies and velcro sandwiches are not attached to the thighs by default, because the skydiver has to set the comfortable height for themselves. The attachment can be made by a local rigger very easily.



Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.

Configurator / Designer


CONFIGURATOR

Premade/Unique Designs
Printed


EASY TO SELECT DESIGNS


CONFIGURATOR

Color yours
Non Printed


ALL ELEMENTS CAN BE COLORED


Your browser:

RW Camera Suit ®

1/5 DESIGNER

PRICE: 0 +VAT

USE THE LEFT/RIGHT KEY ON YOUR KEYBOARD.

Designer

Wing size

Choose the wing size that you need.

Sit Small Normal Large

Elements

Stitching color

Premade Designs

Full Printed

(Please note that the suit won"t look exactly the same. These are repetitive seamless patterns it may slightly differ from the samples can be found below.)
RW Camera Suit ®

Code: p1

RW Camera Suit ®

Code: p2

RW Camera Suit ®

Code: p3

RW Camera Suit ®

Code: p4

RW Camera Suit ®

Code: p5

RW Camera Suit ®

Code: p6

RW Camera Suit ®

Code: p7

RW Camera Suit ®

Code: p8

RW Camera Suit ®

Code: p9

RW Camera Suit ®

Code: p10

RW Camera Suit ®

Code: p11

RW Camera Suit ®

Code: p12

RW Camera Suit ®

Code: p13

RW Camera Suit ®

Code: p14

RW Camera Suit ®

Code: p15

RW Camera Suit ®

Code: p16

RW Camera Suit ®

Code: p17

RW Camera Suit ®

Code: p18

RW Camera Suit ®

Code: p19

RW Camera Suit ®

Code: p20

RW Camera Suit ®

Code: p21

RW Camera Suit ®

Code: p22

RW Camera Suit ®

Code: p23

RW Camera Suit ®

Code: p24

RW Camera Suit ®

Code: p25

RW Camera Suit ®

Code: p26

RW Camera Suit ®

Code: p27

RW Camera Suit ®

Code: p28

RW Camera Suit ®

Code: p29

RW Camera Suit ®

Code: p30

RW Camera Suit ®

Code: p31

RW Camera Suit ®

Code: p32

RW Camera Suit ®

Code: p33

RW Camera Suit ®

Code: p34

RW Camera Suit ®

Code: p35

RW Camera Suit ®

Code: p36

RW Camera Suit ®

Code: p37

RW Camera Suit ®

Code: p38

RW Camera Suit ®

Code: p39

RW Camera Suit ®

Code: p40

Measurements Fields marked with * are required!
Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.
Please, fill out each field.



Click on the form field
and begin measuring.

Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.

Settings & Extras

Settings

Collar type

Select your collar type.

Low Medium High

Gender

Choose you sex.

Female Male

Wing size

Choose the wing size that you need.

Sit Small Normal Large

Options: + EXTRA CHARGE

Extra Pocket

Zippered pocket on arms, thighs or inner chest.

Large Wing

Normal Wing

Small Wing

VISO Pocket

VISO pocket

Windproof Zipper

Windproof Zipper

Bootie Cord Lock

Without zipper, made with rubber stripe, anti-slip rubber sole, easy to put on and take off.

Bootie Zip

Made with zipper on the inner side, follows the shape better/tighter, more material harder to put on and take off.

Embroideries Fields marked with * are required!

Name Embroidery

+20€

Extra Embroidery

+40€

Upload extra embroideries

Billing Address Fields marked with * are required!

I have a company

Processing.. Please Wait!