THE CONFIGURATOR IS LOADING...

Preview



Baracuda Power Plus is the first one of our new generation variety for wingsuit products.As its name suggests, this suit is a more robust version of Baracuda Power, meanwhile preserving the easy handling feature together with stability and speed. Power Plus has more armwings surface, that is why the performance gets bigger, which improves the flare and glide ratio.

 

Backflying: thanks to the new wings and leading edge the accomplishment of the backyling just got improved, and all the transitions have become more easy and even smoother. The main purpose of our development was to achieve a powerful but easy to handle acro-power wingsuit.


We ensure the stability of the suit by a brand new bootie formation which we could make by doing some modifications on both legwings.


Leading edge: We can send it with two types of performance foam: either with Soft or with Power foam. The material was developed only for this purpose.


It has 3 different layers: an outer smooth coating- foam, one in the middle, and a lower layer with net surface, which gives the important stability factor of the suit. Thanks to those improvements the leading edge’s aerodynamic, the shapes are better, which means even more performance. The first third of the armwings and both esc sleeves got more than double amount of ribs. So currently Baracuda Power Plus has the most dense ribs system on each arms at the wingsuit market.


We want to assure you that Power Plus is not a nurtured model at all, since we are talking about a completely new, 100 % new generation member of Intrudair's wing suit product range.


New Leading Edge:


Thanks to the new leading edge, dense armwing ribbing and legwings tail design, the suit's performance and flare increased by at least 10-20%, this way the suit can catch up with the older, larger wing-surfaced models. Also the smoothness provides extra agility, easy handeling and stability.





Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.


Baracuda Power Plus is the first one of our new generation variety for wingsuit products.As its name suggests, this suit is a more robust version of Baracuda Power, meanwhile preserving the easy handling feature together with stability and speed. Power Plus has more armwings surface, that is why the performance gets bigger, which improves the flare and glide ratio.

 

Backflying: thanks to the new wings and leading edge the accomplishment of the backyling just got improved, and all the transitions have become more easy and even smoother. The main purpose of our development was to achieve a powerful but easy to handle acro-power wingsuit.


We ensure the stability of the suit by a brand new bootie formation which we could make by doing some modifications on both legwings.


Leading edge: We can send it with two types of performance foam: either with Soft or with Power foam. The material was developed only for this purpose.


It has 3 different layers: an outer smooth coating- foam, one in the middle, and a lower layer with net surface, which gives the important stability factor of the suit. Thanks to those improvements the leading edge’s aerodynamic, the shapes are better, which means even more performance. The first third of the armwings and both esc sleeves got more than double amount of ribs. So currently Baracuda Power Plus has the most dense ribs system on each arms at the wingsuit market.


We want to assure you that Power Plus is not a nurtured model at all, since we are talking about a completely new, 100 % new generation member of Intrudair's wing suit product range.


New Leading Edge:


Thanks to the new leading edge, dense armwing ribbing and legwings tail design, the suit's performance and flare increased by at least 10-20%, this way the suit can catch up with the older, larger wing-surfaced models. Also the smoothness provides extra agility, easy handeling and stability.





Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.

Videos

Configurator / Designer


CONFIGURATOR

Premade/Unique Designs
Printed


EASY TO SELECT DESIGNS


CONFIGURATOR

Color yours
Non Printed


ALL ELEMENTS CAN BE COLORED


Your browser:

Barracuda Power + ®

1/5 DESIGNER

PRICE: 0 +VAT

USE THE LEFT/RIGHT KEY ON YOUR KEYBOARD.

Designer

Elements

Stitching color

Premade Designs

Full Printed

(Please note that the suit won"t look exactly the same. These are repetitive seamless patterns it may slightly differ from the samples can be found below.)
Barracuda Power + ®

Code: p1

Barracuda Power + ®

Code: p2

Barracuda Power + ®

Code: p3

Barracuda Power + ®

Code: p4

Barracuda Power + ®

Code: p5

Barracuda Power + ®

Code: p6

Barracuda Power + ®

Code: p7

Barracuda Power + ®

Code: p8

Barracuda Power + ®

Code: p9

Barracuda Power + ®

Code: p10

Barracuda Power + ®

Code: p11

Barracuda Power + ®

Code: p12

Barracuda Power + ®

Code: p13

Barracuda Power + ®

Code: p14

Barracuda Power + ®

Code: p15

Barracuda Power + ®

Code: p16

Barracuda Power + ®

Code: p17

Barracuda Power + ®

Code: p18

Barracuda Power + ®

Code: p19

Barracuda Power + ®

Code: p20

Barracuda Power + ®

Code: p21

Barracuda Power + ®

Code: p22

Barracuda Power + ®

Code: p23

Barracuda Power + ®

Code: p24

Barracuda Power + ®

Code: p25

Barracuda Power + ®

Code: p26

Barracuda Power + ®

Code: p27

Barracuda Power + ®

Code: p28

Barracuda Power + ®

Code: p29

Barracuda Power + ®

Code: p30

Barracuda Power + ®

Code: p31

Barracuda Power + ®

Code: p32

Barracuda Power + ®

Code: p33

Barracuda Power + ®

Code: p34

Barracuda Power + ®

Code: p35

Barracuda Power + ®

Code: p36

Barracuda Power + ®

Code: p37

Barracuda Power + ®

Code: p38

Barracuda Power + ®

Code: p39

Barracuda Power + ®

Code: p40

Measurements Fields marked with * are required!
Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.
Please, fill out each field.



Click on the form field
and begin measuring.

Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.

Settings & Extras

Settings

Gender

Choose you sex.

Female Male

Options: + EXTRA CHARGE

3D Performance Foam

Better performance, more accurate leading edge/ better shape, tighter fit on the arms.

Arm Cutaway System

It is responsible for detaching the wings on wingsuits, the arm wings can be easily released by pulling a yellow cable handle (available for piranha models).

Camera Pocket

Zipper opening at the chest for chest mounted cameras.

Leg Cutaway System

It is used for easy release of the leg flap (not supported, can be omitted.)

Embroideries Fields marked with * are required!

Name Embroidery

+20€

Extra Embroidery

+40€

Upload extra embroideries

Billing Address Fields marked with * are required!

I have a company

Processing.. Please Wait!